Originally Posted by
kpaynter
Syncrowave 250DX. If you've got the space. I can see the appeal of the smaller Dynasty's for confined working areas and transportability. Dynasty's work well too but cost a bit more.
Syncrowave's are great except for one thing: If you don't get one of the new ones WITH the pulser built in, you won't really be able to pulse very well just by adding the pulser. I've been trying to use an old PC-300 with one of the newer machines and I just don't get the response I'm after but then the old pulser may be dying...works better on the older, smaller syncrowave 250's. If you really need to weld anything heavy, just switch it to stick mode and burn up some 3/32" 7018. Even the little Dynasty's do some nice stick...multi pass 3/4" plate anyone?
You'll be kicking yourself if you buy a DC only machine.
It's a lot of money to spend, might as well do it right the first time.
Bookmarks