Knives

[Nathanrtaylor]

I got the urge to try my hand at knife making a few weeks ago as a distraction from work and school. And by hand I mean with as little investment as possible.
This one required a couple of files, some sandpaper, a hacksaw, and a drill.

Heat treating was done in a makeshift forge made out of stacked fire brick and a propane torch.

I have a few others in the works, but it's slow going. Fun though.

12193790_10206264810353329_5101051909146353846_n.jpg

[David Tollefson]

Nicely done!

[Nathanrtaylor]

image.jpg

I finished this one last night. 4 inch blade, 1095 high carbon steel, brown canvas micarta scales.

Still entirely done with hand tools other than drilling for pins.

[Nathanrtaylor]

A little Christmas present for my dad. This blade shape is generally called a "kiridashi", but functionally and ergonomically it is basically a super fancy Stanley knife without a replaceable blade. This one has a left-hand specific chisel grind

I'd keep one around though, and will probably make more of them. Everybody's got boxes to open.

Fish scale patina was done with yellow mustard. No, really.

image.jpg

[ericpmoss]

Just some pretty pattern-welded blades to bump the thread.

Gallery

[Octave]

I got the urge to try my hand at knife making a few weeks ago as a distraction from work and school. And by hand I mean with as little investment as possible.
This one required a couple of files, some sandpaper, a hacksaw, and a drill.

Can you tell us a little bit about your process for this? I'm really interested in the same - long time collecter/admirer of knives and would love to take a shot a making a few. What was the starting material? What tools did you need? Any notes or points to useful directions would be hugely appreciated!

[slowSSer]

Can you tell us a little bit about your process for this? I'm really interested in the same - long time collecter/admirer of knives and would love to take a shot a making a few. What was the starting material? What tools did you need? Any notes or points to useful directions would be hugely appreciated!

good starting point for some materials:

KnifeKits.com™ : Knife & Gun Making Supplies and Tools

[slowSSer]

more to come this weekend. all materials bought from the link i posted above. so, it's more like "knife assembly and handle shaping/finishing" more so than true "knife making"

IMG_2589.jpg

IMG_2659.jpg

[Blue Jays]

I got the urge to try my hand at knifemaking a few weeks ago as a distraction from work and school.

Nice. I have a similar small custom built by Busse Combat Knife Company that is great for utility work.

[mzilliox]

very cool, wanna build me one?

[Eric Estlund]

Peanut butter sandwich knife: designed to reach the bottom of the jar and do a perfect diagonal triangle cut.



This is number 10, so I decided to try pushing a bit. Walnut contoured grip with Birch pin, copper spacer and steel press fit double guard. Blade is reclaimed 1075 with an as-found surface finish on the flats.

[Jason Musgrave]

Gorgeous work!

[Eric Estlund]

Thank you.

If you dig that sort of stuff, I have a hobby page here.

[72gmc]

I have a theory it's the dog with the skills. Eric is a front.

[Eric Estlund]

[Chris Chesebro]

That is the nicest peanut butter knife in existence, I think.

Especially the little copper bolster/spacer.

Beautiful.

[Eric Estlund]

Apple slicer-

[Chris Chesebro]

Love the handle.

If you're open to orders, count me in!

[Eric Estlund]

I have a 9" here that tapers from about .11" at the handle to .02" just behind the tip. That can go up or down based on the use and preferences. This is on a knife with a 2.5" heel.



Too dark to get a decent spine pic, but I can try again tomorrow. They are all hand ground, and the particulars will vary a bit based on what I'm making and who it's for.

[Eric Estlund]

Not exactly a knife:



More info on WinterCutlry.com