ti/carbon Guru I refinished.
Frame and fork finished in British racing green, cream and metallic red...
IMG_1763 by Nate Zukas, on FlickrIMG_1764 by Nate Zukas, on FlickrIMG_1765 by Nate Zukas, on FlickrIMG_1766 by Nate Zukas, on FlickrIMG_1767 by Nate Zukas, on FlickrIMG_1771 by Nate Zukas, on FlickrIMG_1772 by Nate Zukas, on FlickrIMG_1773 by Nate Zukas, on FlickrIMG_1774 by Nate Zukas, on FlickrIMG_1775 by Nate Zukas, on FlickrIMG_1778 by Nate Zukas, on FlickrIMG_1779 by Nate Zukas, on FlickrIMG_1784 by Nate Zukas, on FlickrIMG_1787 by Nate Zukas, on FlickrIMG_1789 by Nate Zukas, on FlickrIMG_1790 by Nate Zukas, on FlickrIMG_1791 by Nate Zukas, on FlickrIMG_1798 by Nate Zukas, on FlickrIMG_1811 by Nate Zukas, on Flickr
Thanks! NATE
Wrapping up a signature finish frame:
A wise framebuilder once told me that it is a good idea to have a hobby other than framebuilding so one doesn't burn out and can switch mental processes to re-energize.
Thats why I have taken up blacksmithing, nothing like belting the hell out of hot steel after a big day/week of the super tight miters and tiny tolerances of the bike frame world.
Plus it warms up my workshop which has barely got above 0 degress at all this week
_______________________________________________
Keith Marshall
Kumo Cycles, ACT Australia
Australian Cycle Design and Gasflux Distributor
From the shop:
Out the door:
From the studio (pics by Anthony Bareno): "Tool Series" crit bike, ready to work!
A quick job for our buddies at BTR
14584025177_b603223044_z.jpg
14747458546_db914636b5_z.jpg
14583755010_09d6a5e1a5_z.jpg
the last of BML WE HAD A GOOD SHOP
14589144029_15a8f5edc9_z.jpg
14748417552_17a42aa476_z.jpg
14725721656_964cfdfd0f_z.jpg
14745549401_415ac0a61d_z.jpg
14768581823_dbaebd54ca_z.jpg
14562079548_77749290a4_z.jpg
14600922388_3ea31b3b6c_z.jpg
and then a new direction
14667922658_8da5a29533_z.jpg
Last edited by Eric Estlund; 08-08-2014 at 09:27 AM.
Bookmarks