Friday PicFest No.88

[e-RICHIE]

expanding atmo -

[Clockwork]

Trials bike with 20mm axles front and rear.

http://www.clockworkbikes.com/urban_20mm_1.html

1.jpg

2.jpg

5.jpg

7.jpg

[steve garro]

Busy as hell. hit a roadblock on the raw frame but it will work out - custom fab needed. Blue bike living here. nice 26" MTB! light, too. new XT 10-speed. - Garro.

[Dave Kirk]

This week in Bozeman. Thinking ahead to Austin, making stuff hot and a fully loaded, fillet tourer.

Dave

[Dazza]

I need
there is nothing
I think
I design
I produce
My designs are used to make my frames
Then share with others
Cadenzia lug set fixie off to Joey for his paint magic
and I well under way with a sloping top tube frame using the the LLewellyn XL Compact lug set for a local rider

[conorb]

Hoping to send of to paint early next week.

















Conor

[anthonymaietta]

In Manitoba for last week's edition. Back in Mass.

Road racing frame for Joachim in South Carolina. New ENVE seat post, stem, fork and bars to have matching painted accents when they arrive.

[YiPsan]

slow week here, picking up an interrupted project took lots of time!
11182010085.jpg11182010088.jpg11182010090.jpg

[Eric Estlund]

A couple from a fillet brazed/ laminate light touring rig-

[bellman]

the 4:30 am drop out before going to work and the SS is one step closer to the big show

[Don Walker]

Thanks to Gary Prange, I have decals again! Way more color combo's than before, too!

DW

[Carl S]

Gettin' ready for the big show

[Craig Ryan]

Some pieces all prepped and ready for a 56.

Attachment 26949

[OhYeah Bicycles]

Can't say I haven't been working hard... but I can say it hasn't been on the bike... got a few things done

IMG_4593.jpg

bike.jpg

wood.jpg

[suspectdevice]

This stuff is magic





6 tweaked or new stock sizes. All new CNC parts. Too many part numers. Furious 16 hour days. Customers. Dutchmen. Money.
I need a beers.

[Greg Morris]

All that is left on this 47cm tourer is low rider bosses and fork cable routing. Lots to think about once a frame gets really small! (sorry about the bad photo)


Cut out some lugs for my next build out of Pacenti artisan stainless lugs.


All of the bits and pieces.


And finally some good photos of this red city bike

[zank]

Di2 meet Max...bridging the generation gap

[Dave Anderson]

Colnago Resto.....

[briordon]

Still a bit to do: position the chainguard, setup the cables, etc but its getting close. This is he first rack that I've built. Since it supports my full body weight, it should do fine with a case of Ipswich Ale. I kind of wish that I put a taillight on it too...next time:

DSC_0011.jpgDSC_0014.jpgDSC_0019.jpg