Friday PicFest No.105

[e-RICHIE]

i am traveling for about 7-8 days, so i'll grab a page from the cookbook.
this is a good recipe and the last passage is favorite ingredient atmo -

[steve garro]

busy as all hell. - Garro.

[Dave Kirk]

Another JKS Classic headed to Taiwan - this time a Terraplane.

Dave

[Don Walker]

Itty bitty, teenie weenie team track bike for Melinda Townsend.

No, its not going to make UCI minimum weight....

DW

[VertigoCycles]

I found photos on my HD from about ten years ago when I was designing bits and bobs for trials bikes. A little integrated bash/spider for 952 cranks and one of MANY rubber compounds for brake pads I tested in conjunction with 5.10



Fancy photo of a 29er of mine at NAHBS courtesy of Dirt Rag

[Tom Kellogg]

Early and Late

Beginnings of a fabricated double OS BB with 24mm chain stays:
FNL15a.jpg

Lining up the next paint batch:
FNL15b.jpg

[Dazza]

grab some stainless Custodian lugs
give it some thought
whizzz, saw saw, whizzz, file file file
Bingo

[conorb]

After NAHBS we're back to working the metal.















Conor

[bellman]

These are shots of a 29er I'm building. Thanks to Mike Z. for his photo strip tutorial on cutting internal routing slots on a mill last year.

[YiPsan]

small rando with OS compact
03152011241.jpg03112011219.jpg03112011221.jpg03142011229.jpg03142011230.jpg03152011236.jpg03112011216.jpg

[baum]

Time to paint some steel Ristretto's this week. One Ristretto headed to Singapore whilst the other headed to the states. Also working on yet another GT design at the request of a German customer.

Have a great weekend.

Jared

[Eric Estlund]

Fillets- raw

[Tyler Evans]

@02136...

1a.jpg

1b.jpg

1c.jpg

1d.jpg

7.jpg

1.jpg

6.jpg

4a.jpg

2.jpg

5.jpg

4.jpg

3.jpg

1e.jpg

8a.jpg

[Craig Ryan]

Ya get it done, then you realize the work's just beginning.
Sanding.

IMG_7832.jpg

IMG_7904.jpg

IMG_7905.jpg

Attachment 30386

Attachment 30387

[Chauncey Matthews]

Custom rack for a custom Rivendell. Order was for stainless and "ultra minimalist". Fun fabbing it with a hidden light mount and fender strut mounts integrated in the EVT lugs... just need to get longer strut bolts.

[MikeB]

Got the front shifting added and plan on putting some miles on this one over the weekend.







Cant wait to get my Anvil Bender so I can finish these:

[cardinal]

There's been a lot of stainless going through the signal shop lately.

[Pi Guy]

More work on #4. It's going pretty well and I keep taking notes on how to make the process better next time. Have a good weekend all.

-Jason


One of Dazza's lugs carved to be a little less voluptuous.


Building jigless. DT/HT joint fixturing set up.


Need to work on the heat control on the lug edges.


Post soak.


Cleaned up.

[anthonymaietta]

For our Super Moderator Justinf. Some big shoes to fill after he took receipt of a Joe Bell painted Kirk a few weeks ago and has a Zank Max on order. While this isn't my "signature scheme" it is the 4th Maietta to be painted this way.

Thank you for the order Justin; I do appreciate it greatly.