need stainless socket dropouts

[Rich Beaudoin]

Anyone have a pair of ss socket-type dropouts similar to Ritchey 70ish degree?
I love Llewellyn d/os but the cs needs to be 13.5mm. The rider wants as close to Ritchey as possible and Nova is out of stock on the ones with the little diamond cutout. Full XCR with lugs unpainted so it has to be SS...
I can pay or trade, just trying to get the rear end of this bike finished
Rich

[Dornbox]

I have a set from Ceeway that was made for the XCR tube set... or so I was told. They're a plug though rather than a socket.

[steve garro]

They're a plug though rather than a socket.

throw a set of HJ plug DO's on there - it will look sweet. - Garro.

[Dornbox]

LS- Stainless- 63º- approx 14mm CS socket for XCR (Correction "for 953" not XCR) tube sets. More info on Ceeway's site.


Untitled by DORNBOX, on Flickr

[Dave Anderson]

LS- Stainless- 63º- approx 14mm CS socket for XCR tube set. More info on Ceeway's site.


Untitled by DORNBOX, on Flickr

Just an FYI...Those will work with 953, but not XCR. XCR chain stays have a 13.5mm outside diameter.

Dave

[Dornbox]

Just an FYI...Those will work with 953, but not XCR. XCR chain stays have a 13.5mm outside diameter.

Dave

Many thanks for the correction Dave! I actually got them for OS non stainless chain stays that I ordered from Ceeway as well.

[Dazza]

I have XL sized XCr tubes for lugs here
and Columbus made them with 12.5mm OD tips on the CS and SS so they are useful in my dropouts and others

the OS XCr will be the same

The process required Columbus to do an extra annealing step in the tube shaping.
adds to the cost but......................................

[Rich Beaudoin]

Thanks for the responses - I ended up getting exactly what I was looking for from Mike Desalvo. Should have stopped there before posting