Dear Guest,
Please register or login. Content don't create itself!
Thank you
Likes:
0
Friday PicFest No.200
Letting my inner e-RICHIE out :-) :
Thanks!
Dave
Re: Friday PicFest No.200
I've been wicked wicked busy doing work / building for others lately hence the lack of FNL and VS posts but here's a beauty / fatty that I've been planning for a while. I had some DTs custom draw for me by the kind folks at Columbus. With a mix of thin and thick walled tubes, she should be very stiff and yet very respectable at 4 lbs 1oz... but I do still have to add paint and a couple braze ons.
_DSC0464 by DORNBOX , on Flickr
_DSC0465 by DORNBOX , on Flickr
_DSC0469 by DORNBOX , on Flickr
_DSC0477 by DORNBOX , on Flickr
_DSC0475 by DORNBOX , on Flickr
Thanks,
Chris
Re: Friday PicFest No.200
Re: Friday PicFest No.200
Re: Friday PicFest No.200
__________________________________________________ ______________
@02136 this week:
Titanium All Season Light Touring :: Camagnolo Chorus : Paul Racer Brakes : Wound Up Fork : Firefly Stem & Post : Berthoud Stainless fenders : Tubus Titanium Rack : Topeak full size frame pump :
__________________________________________________ ______________
@02125 this week:
Daily updates of the buildout here: XXX
Cheers!
FNL4EVA.
Re: Friday PicFest No.200
Another week building the tools of riding.
Re: Friday PicFest No.200
Spent my free time on tooling this week since I ordered the wrong Seatstays...
Getting my Bringheli really dialed in.
Modified my BB cups, I wanted something that would NOT interfere with chainstay miters. This allows me to bust the miters out on the bench grinder super fast and check for fitment without pulling the bike out of the jig.
Loosing my hex key was getting real annoying so I added Adjustable Handles, I made the custom spacers to make them easier to use.
I also milled my TT support plate to account for my newly mounted scale.
Then Finally I made some BB Vice Cups for a fellow Telai-ista. This will allow him to hold a BB in the vice so he can carve and work on the sockets. He wanted it made from aluminum to act as a soft jaw. The shoulders are to prevent the BB from falling out of the vice if its loosened for re-positioning.
Thanks -Todd.
Re: Friday PicFest No.200
Moving into the 21st century.
Mock up by Zanconato Custom Cycles , on Flickr
Trying to remember to breath under the hood.
Andrew Y by Zanconato Custom Cycles , on Flickr
Andrew Y by Zanconato Custom Cycles , on Flickr
Andrew Y by Zanconato Custom Cycles , on Flickr
Andrew Y by Zanconato Custom Cycles , on Flickr
Re: Friday PicFest No.200
Re: Friday PicFest No.200
03082 Playlist :
Beginnings of a 650b
Pink Panther for the 44 HQ Shop Ceiling : Operation Heat Retention
Rinnai ES38 in the house : Will be making a more finished stand this weekend - I call her "The Natural"
Clients Fat bike hubset back from Ano : Paul Components Rhub 170 + Whub 135
Fat Bikes still on the mind...
Re: Friday PicFest No.200
Finish sanding.jpg
Sand, sand, coat, bake, start again.
3 coats of finish epoxy and two of 2k polyurethane.
top coat.jpg
Once the final coat is on, 320 -> 400 -> 600 -> 800 -> 1200 -> Tripoli powder -> metal polish. There has to be a better way.
Re: Friday PicFest No.200
Patrick's cross frame continues...........
IMG_5550 by Nate Zukas , on Flickr
IMG_5557 by Nate Zukas , on Flickr
IMG_5559 by Nate Zukas , on Flickr
]
IMG_5559 by Nate Zukas , on Flickr
IMG_5572 by Nate Zukas , on Flickr
IMG_5575 by Nate Zukas , on Flickr
IMG_5576 by Nate Zukas , on Flickr
IMG_5542 by Nate Zukas , on Flickr
See ya next week! NATE
Re: Friday PicFest No.200
I managed to not get any photos of the metal work this week,
Did end up with photos whilst I was turning the pedals:
Happy riding, happy building
_______________________________________________
Keith Marshall
Kumo Cycles , ACT Australia
Australian Cycle Design and Gasflux Distributor
Re: Friday PicFest No.200
Been a funny week catching up on small stuff. No finished bike pics this week.
Russ racing his Shand at Bo'ness by shandcycles , on Flickr
Cycling Plus magazine by shandcycles , on Flickr
I ordered 6 metres of tubing for seatstay bridges. Wasn't expecting this!
looooooongggggg by shandcycles , on Flickr
Prototype frame for new UK bike brand about to be launched.
lesser spotted Shand lug by shandcycles , on Flickr
cutting stay bridges by shandcycles , on Flickr
new seatstay splitter by shandcycles , on Flickr
we deal with barriers differently here in Scotland!
bunny.jpg
Re: Friday PicFest No.200
I have no idea where that week went.
Working along on a frame, overhauling the shop for 2013, and,IMG_4605.JPG IMG_0388.jpg pacheco1.jpg I GOT MY TAXES DONE ALREADY!!
- Garro.
Re: Friday PicFest No.200
2013: earn paychecks
metal goes in one end, money comes out the other
pre-pro frame all glossed up:
rev. 4 off-road walker off to paint
New ski mounts for racing sit-ski project
136 years young
not the most productive year for bicycles yet though...
sn#joe13:one hot steel beastie-
OOS PegoRichie tubes: Horizontal to vert oval bi-axial TT, oval to square DT, squoval tapered chainstays,full-wrap straight stays, oval internal-plug seatube.
sn#mit13:aluminum 29'r for ss use with team beer PF30 adapter
Re: Friday PicFest No.200
Pardon the crummy shots and shadows. Too cold to stay out long.
Attached Images
Similar Threads
By zank in forum Friday Night Lights
Replies: 9
Last Post: 03-04-2012, 08:32 AM
By steve garro in forum Friday Night Lights
Replies: 17
Last Post: 01-22-2012, 08:26 PM
By steve garro in forum Friday Night Lights
Replies: 15
Last Post: 01-16-2012, 08:13 AM
By steve garro in forum Friday Night Lights
Replies: 11
Last Post: 01-07-2012, 09:44 PM
By steve garro in forum Friday Night Lights
Replies: 13
Last Post: 01-01-2012, 09:24 PM
Tags for this Thread
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules
Bookmarks