Dear Guest,
Please register or login. Content don't create itself!
Thank you
-
Dreidel
For the past seven or eight years I raid my material drops around the holiday time and make spinning tops for my friends and their families. I had a good sized brass round that I thought would make a good sized dreidel so I spent about an hour in the shop working on it and I think it turned out pretty nice. As per my normal MO, I should have taken better photos before delivering it...sorry for the link.
Instagram
-
Re: Dreidel
That's great! Would totally buy one.
-
Re: Dreidel
Me too, let us know . . .
-
Re: Dreidel
thanks guys. I make them from leftovers and there's only so much. I'm doing another small run of heatsinks soon so we'll see what remains after that. If there's enough, I'll get in touch.
FWIW, this is about 1.5" corner to corner and weighs just shy of 8oz. You wouldn't want to play with this on a nice table. My 5y/o dropped it on our teak table and the bearing left a pretty good dent in there.
-
Re: Dreidel
Originally Posted by
VertigoCycles
FWIW, this is about 1.5" corner to corner and weighs just shy of 8oz. You wouldn't want to play with this on a nice table. My 5y/o dropped it on our teak table and the bearing left a pretty good dent in there.
I would expect nothing less.
-
Re: Dreidel
Too cool Sean. The dreidel game was one of the best memories I have of family Channukah.
-
Re: Dreidel
Originally Posted by
Too Tall
Too cool Sean. The dreidel game was one of the best memories I have of family Channukah.
My family loves it too. I'm going to have to make one for my girls one of these days.
-
Re: Dreidel
I'm in for one...or as many as you would be willing to sell me (I have 7 siblings, my wife has 6, and we have lots of nieces and nephews so we could help fund this as a project).
-
Re: Dreidel
Originally Posted by
NYCfixie
I'm in for one...or as many as you would be willing to sell me (I have 7 siblings, my wife has 6, and we have lots of nieces and nephews so we could help fund this as a project).
I never intended on making them for sale, but if you all want them, I'll make a go of it. The material isn't terribly expensive, but there's a lot of time involved, mostly in setting up the masks so the etchant doesn't get where it's not wanted. The one I made took roughly an hour of machining (it started from round stock), and roughly another hour of time cutting, weeding and applying the mask and then etching.
I don't want to put anyone out, but to make it worth my while, they need to sell for ~$50. My wife poked around Google and says that similar but smaller ones are going for 50-60. I'd make them out of 3/4 square bar to cut down on waste and they'd have a pressed in bearing to spin on which makes them spin nicely and not mark up tables as much as a machined point (I have first hand experience on this one).
I was going to make one for our family with a titanium stem just for shits. If anyone feels like they need one of those, let me know but it's a lot more work so the cost would be higher. I think I have enough 6/4 drops to maybe do five of those and perhaps I have enough ceramic bearings for them too.
I'll kick some back to the Salon and put the rest in my kids college funds. Maybe it'll buy a book or two for them in ten years. If this is out of line here Josh, just delete the post and accept my apologies.
-
Re: Dreidel
-
Re: Dreidel
Originally Posted by
VertigoCycles
I never intended on making them for sale, but if you all want them, I'll make a go of it. The material isn't terribly expensive, but there's a lot of time involved, mostly in setting up the masks so the etchant doesn't get where it's not wanted. The one I made took roughly an hour of machining (it started from round stock), and roughly another hour of time cutting, weeding and applying the mask and then etching.
I don't want to put anyone out, but to make it worth my while, they need to sell for ~$50. My wife poked around Google and says that similar but smaller ones are going for 50-60. I'd make them out of 3/4 square bar to cut down on waste and they'd have a pressed in bearing to spin on which makes them spin nicely and not mark up tables as much as a machined point (I have first hand experience on this one).
I was going to make one for our family with a titanium stem just for shits. If anyone feels like they need one of those, let me know but it's a lot more work so the cost would be higher. I think I have enough 6/4 drops to maybe do five of those and perhaps I have enough ceramic bearings for them too.
I'll kick some back to the Salon and put the rest in my kids college funds. Maybe it'll buy a book or two for them in ten years. If this is out of line here Josh, just delete the post and accept my apologies.
I'm in.
-
Re: Dreidel
Where do I send the gelt?
Originally Posted by
VertigoCycles
I never intended on making them for sale, but if you all want them, I'll make a go of it. The material isn't terribly expensive, but there's a lot of time involved, mostly in setting up the masks so the etchant doesn't get where it's not wanted. The one I made took roughly an hour of machining (it started from round stock), and roughly another hour of time cutting, weeding and applying the mask and then etching.
I don't want to put anyone out, but to make it worth my while, they need to sell for ~$50. My wife poked around Google and says that similar but smaller ones are going for 50-60. I'd make them out of 3/4 square bar to cut down on waste and they'd have a pressed in bearing to spin on which makes them spin nicely and not mark up tables as much as a machined point (I have first hand experience on this one).
I was going to make one for our family with a titanium stem just for shits. If anyone feels like they need one of those, let me know but it's a lot more work so the cost would be higher. I think I have enough 6/4 drops to maybe do five of those and perhaps I have enough ceramic bearings for them too.
I'll kick some back to the Salon and put the rest in my kids college funds. Maybe it'll buy a book or two for them in ten years. If this is out of line here Josh, just delete the post and accept my apologies.
-
Re: Dreidel
Thanks everyone.
Send me an email at vertigocycles @ gmail . com and let me know which type and how many you want. I'll get back to you with a total price and a papal link.
I'll order material today and with any luck they'll be in hands and spinning before Channukah is over.
-
Re: Dreidel
Originally Posted by
VertigoCycles
... I'll get back to you with a total price and a papal link...
That's some good unintentional humor right there.
DT
http://www.mjolnircycles.com/
Some are born to move the world to live their fantasies...
"the fun outweighs the suck, and the suck hasn't killed me yet." -- chasea
"Sometimes, as good as it feels to speak out, silence is the only way to rise above the morass. The high road is generally a quiet route." -- echelon_john
-
Re: Dreidel
Originally Posted by
David Tollefson
That's some good unintentional humor right there.
indeed. It's the product of attempted to communicate while simultaneously coaxing two kids to get their shit together so we can go to school.
I ordered enough material to make about 30 of them. If it shows up on time, I'll get to work this weekend and will do my best to get them in the mail early next week.
Thanks everyone!
-
Re: Dreidel
Originally Posted by
Too Tall
Double your price.
Seriously. If CeramicSpeed made them, they'd be $500, but then again they'd be made of 3D printed titanium with a ceramic bearing...
-
Re: Dreidel
emailed. pretty cool.
SPP
-
Re: Dreidel
The material showed up today and I whipped one up after dinner. It needs a few little tweaks and it'll be good to go.
Instagram
I can't seem to embed instagram code here. My apologies for another link.
-
Re: Dreidel
I woke up on Saturday with something going on with my low back and haven't been functional all weekend. My intention was to finish 15 or so of these on Saturday but I've been trying to find a way to stay comfortable instead. There has been no improvement and I don't expect to be able to stand at the lathe tomorrow either. My apologies for the delay especially with Channukah beginning on Tuesday. I'll update as soon as there's a change and I can get to work on them.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks