Pegoretti Cicli

[sdg71]

Ciao Marco,
during the late 80 I have spend a lot of time and passion around the mountain bike frames , I was working still from Milani and we had a small team, then when I start to look at the first full-suspension frame I lost a bit of enthusiasm, was not my job , too much kinematics, and consumer interest toward the hardtail go down so at the beginning of 90 I stopped to building mtb frames.
Today, looking at 29 or at the work of people like Steve Garro I confess that I think about the possibilities to do something, I have also talked a bit with columbus , maybe next year there will be something , i hope .
ciao
d

We all hope too....my sexy mtb dream will be a 29" with xcr tubeset.....i wanna be the first to have it!

[Andyindo]

Hi Dario
What does heat treating the tubes entail and what are the advantages?

Already been answered, check out post #254

[over-the-hill]

Sorry missed that. Thanks Dario for the detailed answer.

[Round]

[QUOTE=over-the-hill;354696]Sorry missed that. Thanks Dario for the detailed answer.[/QUOTE
grazie Andy e grazie Over.
d

[Round]

Mtb time , a photo taken at Marostica, world cup.
I can not remember the date, the bike was build by Brent Steelman, ciao Brent,
excell tubeset and if I remember right the rider was Don Myra.

[wankie]

ciao Dario, would you consider making an aluminium version of the pogo stick sometime in the future?

cheers,
thomas..

[Round]

ciao Dario, would you consider making an aluminium version of the pogo stick sometime in the future?

cheers,
thomas..

Hi Thomas ,
i am working on a stainless steel version of the pogo stick , at this moment it is just an idea , i have talk with the guys at Columbus , we need to redesign the tools to make the tubes amd another question is to test the bending capabilietes of the alloy .
have a nice day
d

[Badonkadonk]

Oooooooooooooooooooooooooooh a 29er updated Pogo Stick in stainless steel with a nice 2x10 drivetrain ... i can already sense my wife's anger at the 2013 AmEx bill!

[mmass]

Mtb time , a photo taken at Marostica, world cup.
I can not remember the date, the bike was build by Brent Steelman, ciao Brent,
excell tubeset and if I remember right the rider was Don Myra.

the year would be 1991 and the name of the rider was Don Mirah. in that year also my actual wife race there and also in the MTB world champioship at Ciocco with the Diamond Back Italy squad.

[Round]

the year would be 1991 and the name of the rider was Don Mirah. in that year also my actual wife race there and also in the MTB world champioship at Ciocco with the Diamond Back Italy squad.

grazie mille , i make a mistake with the lastname , sorry
d
Buon Natale vecio

[sdg71]

the year would be 1991 and the name of the rider was Don Mirah. in that year also my actual wife race there and also in the MTB world champioship at Ciocco with the Diamond Back Italy squad.

Dear Mario,

why don't you tell to your friend Nicola everything (i mean about mtb...) about your wife?

[sdg71]

Mtb time , a photo taken at Marostica, world cup.
I can not remember the date, the bike was build by Brent Steelman, ciao Brent,
excell tubeset and if I remember right the rider was Don Myra.

Oh oh oh...campy mtb gruppo (with grip shift....maybe bullet?)

specialized ummagumma tyres

campagnolo rims

san marco royal saddle....

but who's the guy behind the bike? I cannot recognize him!!!

[EFHeath]

Dario, I have been a fan of your bikes since I first saw them at Above Category in Mill Valley, CA, where I was visiting from Hong Kong. Saw a Love #3 and a BLE, and was bowled over.

I have a pretty good idea this is a stupid question, but I can't stop myself from asking it anyway: have you ever fillet brazed steel frames? If not, would you be interested or willing to make the experiment?

Thanks for your great work and inspiring creativity, and for participating in VSalon.

[idefix]

hello to everyone, I'm new in this amazing forum and I wish to introduce myself; I live in the Republic of San Marino and I'm a great fan of Dario; I bought his first Day is Done and then I went to visit him at Caldonazzo: he's a wonderful and awsome person, very kind and modest, intelligent , funny and humoristic. As framebuilder, You all know him, so I won't spend any word. I am really pleased and honored to be now his friend. Thanks Dario for your friendship. Keep going!
This is my bike: FISSA|AZIONE: Finalmente la mia 'Dario Pegoretti - Day is done'
and this is my blog: FISSA|AZIONE

[Alberto]

Dario,
you know we are all waiting for THAT bike! Too many beautiful singletracks around Caldonazzo not to have a hardtail made by your hands. If you decide to begin a new era of XCR Pogostick 29er, mine will be in the first run. For sure.

[advineas]

Idefix,

a perfect build - Congratulations!

May I ask who made that stem? Dario?

Best regards from Vienna (this is a post from my workplace ;)

Martin

[fc356]

[B]Idefix
That is a stunning DID. The build, and color coordination is spot on..

Saluti
Franco

[e-RICHIE]

This is my bike: FISSA|AZIONE: Finalmente la mia 'Dario Pegoretti - Day is done'
and this is my blog: FISSA|AZIONE

hey - nice to see you here atmo!

[oaklee]

Idefix,

absolutely perfect combo. You just made the waiting for my DID more agonizing. Same question I have as Martin, did Dario make the stem too?


cheers and merry Christmas to all..

Idefix,

a perfect build - Congratulations!

May I ask who made that stem? Dario?

Best regards from Vienna (this is a post from my workplace ;)

Martin

[mmass]

Dear Mario,

why don't you tell to your friend Nicola everything (i mean about mtb...) about your wife?

I will tell you all when we will ride together, it's a promise