Friday PicFest No.186

[zank]

Zach M by Zanconato Custom Cycles, on Flickr


Zach M by Zanconato Custom Cycles, on Flickr


Zach M by Zanconato Custom Cycles, on Flickr


Matt S by Zanconato Custom Cycles, on Flickr


Matt S by Zanconato Custom Cycles, on Flickr


Matt S by Zanconato Custom Cycles, on Flickr


Matt S by Zanconato Custom Cycles, on Flickr

[timto]

thanks for being my prototype sled, RIP
IMG_5921.JPG

[hmbatrail]

It's a bike frame

Christy pic 1.jpg
Christy pic 2.jpg
Christy pic 3.jpg
Christy pic 4.jpg
Christy pic 5.jpg
Christy pic 6.jpg

[steve garro]

IMG_4205.JPGIMG_4211.JPGIMG_4166.JPGIMG_4077.JPGIMG_4087.JPGIMG_4010.JPGIMG_4079.JPGI did a seattube replacement - the one with blue stickers.
Never again.
building a new frame would have been the way to go, but i had to get that out of my system.
Client is stoked.
Flat black 29er off to the Zuni Mtns of NM.
I am the main MTB builder for NM even thought I live in AZ it seems.
Working on a 650B for Osaka.
- Garro.

[e-RICHIE]

[fortyfour]

03082 Playlist: Muddy Waters.

New England Builders Ball Sneak Peek. 7pm kids. Don't forget: "Sunny" Providence, RI in the historic Biltmore.







Hardtail 29er with Paragon Sliders headed to Arizona:















New stickers fresh off the presses. I'll have handfuls of these at the show. Stop by and say hello and get your very own.

[benson]

Winter bike.
I finished this a couple of months ago, but only just found time to take photos.
Sometime before next NZ winter I will shorten the wire from the dynohub to thefront light.

[Kumo Cycles]

[Jeff Buchanan]

Finally finished my 9th frame and outfitted my personal bike with proper racks, wheels, and gearing. Ready for my first Gran Fondo at the end of the month!photo[1] (3).JPGphoto[1] (2).JPGphoto[2] (2).JPGphoto[3].JPGphoto[1] (4).JPGphoto[1] (5).JPG

[Pi Guy]

Making good progress on practice frame #3.

Checking miters.


Checking lug fit.


Before and after.


Mitering a SS for its cap.


Before and after, once again.


Good use for an old drill.


New pin technique. My reasoning can be found here.

[Dallas Tex]

Red Bike 0.jpgred bike 1.jpgred bike 2.jpgred bike 3.jpgred bike 4.jpgRed Bike 6.jpgRed Bike 8.jpgRed Bike 9.jpg

Picture of a happy customer getting his new bike......300 acres of State Fair of Texas........Deep Fried Bacon......mmmmmmm

[datas_brother]

Proof that measure once - cut twice or measure twice - cut once is true. This frame was dammaged because the torque wrench was set wrong:




A nice Kilbur that had the toptube fixed:



Hanger shearing off for all the swingers here:




A Tarmac Pro with a cracked seatstay:

[Nate Zukas]

Jackie's road machine has begun!




Thanks, NATE

[Dave Anderson]

Hey all.

I do quite a few misc. projects...from repaints to restorations to mods & such. Here are a few recent projects.

Thank you!

Dave

S&S Coupler retrofit and repaint of a Trek 620:



Repaint - a Schwinn Paramount:



Specialized SL3:



Tubus rack modified and painted:



Disc brake (rear only) conversion on a 1970's Motebecane tadem (never again! :-)):

[EmbroJames]

Couldn't wait to post pictures of this Cazzo. VERY excited to build up my first steel bike in too long a time. This is a new color for this year we're calling Embro Green, as it is the same yellowish / green color we've been using as part of the various Embrocation team livery over the past few years. So, this guy is Embro Blue with Navy Blue logos. Build starts this week. Full bike up next week. IMG_5334.JPG

IMG_5305-001.jpg

IMG_5307-001.jpg

IMG_5310-001.jpg

IMG_5314-001.jpg

IMG_5322-001.jpg

IMG_5326-001.jpg

Attachment 46677

IMG_5332-001.jpg

IMG_5334-001.JPG

[Tyler Evans]

@02136 this week:

Titasnium Mountain 29'er: XTR, King, ENVE, Rotor SRM, Fox, Busyman leatherwork.













Titanium Cross S&S: Industrial raw finish (welds left untouched).















Cheers!

Be sure and stop by the Builders Ball tonight in Providence and say hi to Jamie and Kevin.

[Eric Estlund]

Picking away at quite a fun one:

[Rosko]

another week blazes by and fragments remain. A few back from paint and some more in process:



disk ready for assembly (and perhaps some proper photos...)


ran out of stickers again...