Friday PicFest No.144

[e-RICHIE]

.

.

.

.

.

.

.

[Dave Anderson]

Hi Everyone! Here is an ACB Team Compact, with brushed stainless HT lugs, crown, and drop outs, that's off to its new home this week.

There are some more photos here if anyone is interested: Wylie's Team Compact - a set on Flickr

Thank you!

Dave

[steve garro]

Crazy-Hella-Stupid-*******-Busy.
All these projects & one coming back from paint.........tonight?
- Garro.

[Craig Ryan]

IMG_0034.jpg

IMG_0045.jpg

IMG_0043.jpg

IMG_0046.jpg

IMG_0042.jpg

IMG_0048.jpg
.....

[datas_brother]

almost midnight here.

I made my paint booth functional:



It has a dust filter for the fresh air intake and a four stage filter for the output: turbulence maker (visible), fiber filter, active charcoal and a final fiber filter.

Here it is in action:



I still need to install a door to finish it off.

This is one of the frames I finished this week:



Can you see where the seat stay was broken? Didn't think so.

[Eric Estlund]

Mark's Flecha-









Follow the link for a few more

[Chauncey Matthews]

Touring 26er with matching front and rear crowns....

[baum]

Unpacking the Ultegra Di2 groupset

DSCF4357 small.jpg


Seat stays made using our new mandrel bender and the Anvil bender. Good repeatability and bend quality. The piece of paper at the top right is the hand written procedure for making them from raw tube to finished product. Later typed up with photos.

DSCF4435 small.jpgDSCF4434 small.jpg

[baum]

DSCF4519 (800x549).jpg

Amboß

[Round]

this week at the shop:

a nice book:


IMG_5034.jpg IMG_5035.jpg IMG_5036.jpg



a beautiful Stefano Bollani cd:



IMG_5041.jpg



and an envelope from NYC, my friend wowe sent me a nice photo of Miles, wolfi is a great photographer, take a look at his site
Freelance Professional photographer New York City | Wowe Photography



IMG_5033.jpg IMG_5032.jpg IMG_5037.jpg IMG_5038.jpg IMG_5039.jpg

[Dornbox]

Flat black is the new black ATMO:


IMG_2358 by DORNBOX, on Flickr


IMG_2348 by DORNBOX, on Flickr


IMG_2343 by DORNBOX, on Flickr


IMG_2339 by DORNBOX, on Flickr


Currently on the shop floor... SURPRISE ANOTHER 29ER!!!


IMG_2372 by DORNBOX, on Flickr


IMG_2365 by DORNBOX, on Flickr

[VertigoCycles]

new tools


New Tools by VertigoCycles, on Flickr

[Clockwork]

Bi-lam light tourer.

[fortyfour]

Finally got my vise mounted in the shop:



Putting it to good use immediately:



Snow Bike Progress. Knowing my luck it won't snow this year...



Starrett 24" caliper lovin':

[Tyler Evans]

@02136 this week....

Lot's of full builds in the works.





Round 2 of t-shirts came in.





Titanium road out the door today.









Stems and seatposts all over the place.



Cheers!

Until next week.

[Kumo Cycles]

Finished the Mixte xmas present for my lovely long suffering lady:



Stem with more hearts:



Then started on a xmas present for me, trying to pack as many acronyms into one frame as I can! OSSSDBBDPF30CX; that's Oversize Single Speed Disc Brake Belt Drive Press Fit 30 Cyclocross frame...



And a visit from my favorite workshop assistant, half Labrador, half Daschund, all awesome:

[Adam Eldridge]

New to me 1944 M Head Back Ground. 40's Delta Drill Press in left foreground.


olglory by stanridgespeed bicycles, on Flickr

[Nate Zukas]

Shane's main tubes together.







Please Paragon, need some DR1040 dropouts!

[Alliance Bicycles]

An S3 steel frame bound for Florida, A butted ti road bike headed to Texas, and a Ti touring bike going to southern Cal

[cardinal]

Working on our Ultegera Di2 bike and thinking about NAHBS







We got a few copies of the book that Ziba made about our Oregon Manifest project. It's rad! They were printed steps from our shop. Some proofs:





And my work in progress... make a better coaster brake.