.
Some things wait for me, exactly as I remember them. Some things change.
Jersey Boy | RICHARD SACHS CYCLES
.
Some things wait for me, exactly as I remember them. Some things change.
Jersey Boy | RICHARD SACHS CYCLES
Working on some stainless lugs for the latest Kumo
Experimenting with 90% polish before brazing, then I will do the last 10% afterwards
Took delivery of my new baby.
I have been searching for this girl for two years and now she is mine.
38mm spindle bore means I can face headtubes, cut crown races on forks, face lugs etc etc without messing around with steady rests like I do on my little Hercus
_______________________________________________
Keith Marshall
Kumo Cycles, ACT Australia
Australian Cycle Design and Gasflux Distributor
Flickr is back up! Now for some main tube miter madness....
IMG_7309 by Nate Zukas, on Flickr
IMG_7310 by Nate Zukas, on Flickr
IMG_7318 by Nate Zukas, on Flickr
IMG_7319 by Nate Zukas, on Flickr
DSCN0069 by Nate Zukas, on Flickr
DSCN0073 by Nate Zukas, on Flickr
DSCN0174 by Nate Zukas, on Flickr
DSCN0175 by Nate Zukas, on Flickr
DSCN0179 by Nate Zukas, on Flickr
DSCN0216 by Nate Zukas, on Flickr
Thanks! NATE
This week in the barn:
Support for a 13 year old racer who crashed his favorite bike and broke the left chainstay:
The cracked toptube of a Canyon Ultimate CF went from this:
to this:
This frame was made in 1990. The steer tube had a crack from the fork being over turned. The fork had 2 cracks at the crown. The stays were all cracked at the transition to the Al DOs. Nothing catastrophic but needing attention. It got a paint freshening up and now look almost new.
9355749413_7dc940c8c3_b.jpg9358524660_8d06e17010_b.jpg9355871663_a8afc16a64_b.jpg9358656194_a3bcfc41ca_b.jpg9358652954_9ce6e5b6a8_b.jpg9358526464_16fa521e49_b.jpg9355880757_8392d5fc24_b.jpg9358646838_d057a9e531_b.jpg
More here!https://www.flickr.com/photos/coastcycles/
Schmidt SL hub internal fork wiring, custom 1" threadless stem, clamp on cable hanger, rack and decaluer.
IMG_1291.JPGIMG_1703.JPGIMG_1714.JPGIMG_1717.JPGIMG_1230.JPGIMG_1652.JPGIMG_1651.JPGIMG_1648.JPGIMG_1659.JPGIMG_1665.JPGRockin' it lately.
It may because it's the 3rd wettest July on the books.
We love rain in AZ.
29+ touring bike
29+ Coconino Mountain Cruiser
650B for Mimbres Man
Getting out as well.
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
Some pics from the week.
9358744705_47b9ec76d4.jpg 9361523208_ca0b4bf8e6.jpg 9361522842_d4c3dc734c.jpg
9372540218_47c657a0d5.jpg 9372538932_6e1b2f167e.jpg
9372537664_fa53a90cd5.jpg
9369757333_e98e26ed1b.jpg
Little O.C.D. never hurt anyone!
9372533956_74445c93af.jpg
Never done trying to make the bikes cooler and never done learning new stuff. This is my new vinyl plotter so I can print my own masks, decals and also add a splash of color to the bikes. First up is lime green!
9372584890_3611e12233.jpg
Random proud dad picture of my son at swimming lessons.
IMG950105.jpg
I hope this weather sticks around for a while. It is amazing.
Daisy2profilesmall.jpgDaisy2 headbadgesmall.jpgDaisy2 shallowsmall.jpgDaisy2 downtubesmall.jpgAfter a bit of a hiatus,here is Daisy's bike to replace the one that was stolen.
back at it,more soon.
-Eric
Eric S. Zimmerman
Zimmerman Bicycle works
and Cinematography
zimmermancamera@gmail
check out the work here
www.ericzimmerman.me
Been testing this bike all week!!!
Really impressed with how this climbs by Todd Danger Farr, on Flickr
No filter. Another night of testing! by Todd Danger Farr, on Flickr
Finished the Mixte, going in for paint next week sometime.
Untitled by Todd Danger Farr, on Flickr
Untitled by Todd Danger Farr, on Flickr
Lots of new images up of Pete's frame's finishing work on the flickr page here: Steel frame build, Start to Finish - a set on Flickr
And a few shots around the shop this week:
img_6553.jpg img_6550.jpg
img_6614.jpg img_6627.jpg
img_6631.jpg img_6632.jpg
img_6643.jpg img_6681.jpg
img_6687.jpg
And a few more of Pete's without clear:
img_6670.jpg img_6672.jpg
img_6667.jpg img_6666.jpg
img_6665.jpg img_6668.jpg
img_6671.jpg
Tom Kellogg
Rides bikes, used to make 'em too.
Spectrum-Cycles.com
Butted Ti Road, Reynolds UL, Di2, QuarQ, Conour lite, SP Zero
Steel Cross, X-7, Crank Bros, Concour Lite, Nemesis, Grifo
Steel Piste, D-A Piste, PD-7400, Concour lite, Zipp 404
http://kapelmuurindependent.be
Shortest TFC Member (5'6 3/4") & shrinking
4th of the 5 contract framesets, final alignment, and a view of the shop from atop my work bench. photo (10).JPG photo (11).JPG photo (13).JPG photo (14).JPG photo (15).JPG photo (12).JPG
Richard Sachs lugs painted fine metallic silver with team blue accents.
130725-Rides-0003-BOTW by curt_goodrich, on Flickr
130725-Rides-0009-BOTW by curt_goodrich, on Flickr
130725-Rides-0012-BOTW by curt_goodrich, on Flickr
130725-Rides-0013-BOTW by curt_goodrich, on Flickr
130725-Rides-0025-BOTW by curt_goodrich, on Flickr
130725-Rides-0031-BOTW by curt_goodrich, on Flickr
130725-Rides-0032-BOTW by curt_goodrich, on Flickr
@02125 this week:
_____________________________________________________
Titanium Touring :: WORK ING MACHINE :: Rohner :: Engin Fork :: Circle A Paint :
_____________________________________________________
Titanium Cross :: CrossIsComing ::
____________________________________________________
Titanium MTB 650b ::
_____________________________________________________
Upcoming ::
_____________________________________________________
Opening this Tuesday night at the Firefly Gallery ::
Details here: XXX
_____________________________________________________
Cheers!
Tyler Evans :: Framebuilder :: Firefly Bicycles :: Boston, Mass
website::::::::::firefly:::::::
tumblr:::::::::::::::firefly:::::::::
facebook::::::::firefly::::::::::::
twitter::::::::::firefly::::::::
flickr::::::::::firefly:::::::
instagram::::firefly::::::
Paper work front half of the week, metal work back half-
Michelle's ACB all arounder.
Thanks!
Dave
03082 Playlist : 44HQ Field Trip to the Middle East to see a living legend
650b Ready for powder lovin' :
Proofing 44 Kits !
Customized Welding Apron. Had my eye on yours for some time now Tyler... Hope you don't mind.
110BCD 42t Wolftooth CX Prototype at 44HQ :
Lot's of "Rat Trap" nutrition bags heading out the doors lately
Pulverized Pup :
This weekend will be 60 miles of this + lots of singletrack in prep for H100 :
Bryan F by Zanconato Custom Cycles, on Flickr
Bryan F by Zanconato Custom Cycles, on Flickr
Bryan F by Zanconato Custom Cycles, on Flickr
Bryan F by Zanconato Custom Cycles, on Flickr
Bryan F by Zanconato Custom Cycles, on Flickr
Bryan F by Zanconato Custom Cycles, on Flickr
Bryan F by Zanconato Custom Cycles, on Flickr
Bookmarks