.
I’ve been doing this for so long; either my
balls are bigger now, or I have more of them.
What This Is All About | RICHARD SACHS CYCLES
.
I’ve been doing this for so long; either my
balls are bigger now, or I have more of them.
What This Is All About | RICHARD SACHS CYCLES
A few shots of a recent Brevet rack and integrated decaleur showing brake clearances.
img_7602.jpg img_7632.jpg
img_7621.jpg img_7620.jpg
Random shots of a recent tandem.
img_7449.jpg img_7459.jpg
img_7685.jpg img_7464.jpg
img_7705.jpg img_7706.jpg
img_7680.jpg img_7699.jpg
img_7694.jpg img_7708.jpg
Tom Kellogg
Rides bikes, used to make 'em too.
Spectrum-Cycles.com
Butted Ti Road, Reynolds UL, Di2, QuarQ, Conour lite, SP Zero
Steel Cross, X-7, Crank Bros, Concour Lite, Nemesis, Grifo
Steel Piste, D-A Piste, PD-7400, Concour lite, Zipp 404
http://kapelmuurindependent.be
Shortest TFC Member (5'6 3/4") & shrinking
Ready for paint by CraddockCycles, on Flickr
Richard Craddock
http://www.filamentbikes.com
I made some tools, broke a machine, found a local hardware store that carries METRIC taper pins, fixed the machine, made more tools and then made parts with the tools.
A tapping head would be welcome by VertigoCycles, on Flickr
I made a thingy by VertigoCycles, on Flickr
Special project. @velopest by VertigoCycles, on Flickr
Now I can make these with very little effort by VertigoCycles, on Flickr
I've got a boat in my shop. First clear down. Too cold to be reasonably painting, I must be a nut.
Been working on this old Trek. Gonna paint the graphics on it.
More progress on the Rossi cross build......
IMG_0180 by Nate Zukas, on Flickr
IMG_0181 by Nate Zukas, on Flickr
IMG_0184 by Nate Zukas, on Flickr
IMG_0185 by Nate Zukas, on Flickr
IMG_0188 by Nate Zukas, on Flickr
IMG_0190 by Nate Zukas, on Flickr
IMG_0191 by Nate Zukas, on Flickr
IMG_0196 by Nate Zukas, on Flickr
IMG_0197 by Nate Zukas, on Flickr
IMG_0204 by Nate Zukas, on Flickr
IMG_0202 by Nate Zukas, on Flickr
IMG_0206 by Nate Zukas, on Flickr
Thanks! NATE
_______________________________________________
Keith Marshall
Kumo Cycles, ACT Australia
Australian Cycle Design and Gasflux Distributor
Step through commuter as a "push present' for a fellow's wife.
DSC_5512 copy.jpg
DSC_5514 copy.jpg
DSC_5515 copy.jpg
DSC_5516 copy.jpg
DSC_5517 copy.jpg
DSC_5521 copy.jpg
DSC_5524 copy.jpg
DSC_5526 copy.jpg
Luke
www.fikasbikes.com
IMAG0462.jpg. IMAG0473.jpg
IMAG0465.jpg. IMAG0471.jpg
IMAG0472.jpg
Not done that much this week due to getting ready for the new season. Mtired up the front.......always pay attention when working tubes as talking can distract even if a tube has front n back written on them, hence two top tubes.
Some of the recent bikes.
Campa_7344_ret.jpgCampa_7350_ret.jpgCampa_7351_ret.jpgCampa_7354_ret.jpg
The sun hasn't been shining in sunny Central Fl, so trust me that its shiny. Candy Organic Green sprayed over a black base coat. It's deep. oh, and two bushcraft camping knives my kid and I made from used up files. The 11yo schooled me.
IMG_2695.jpgIMG_2696.jpgIMG_2698.jpgIMG_2702.JPGIMG_2704.JPGJust working along......
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
Tandem Fork more or less ready:
GEBLA-Tandem-75.JPG
GEBLA-Tandem-71.JPG
29er Commuter with SON SL connectorless fork in the making:
GEBLA-Classic29er04.JPG
GEBLA-Classic29er05.JPG
GEBLA-Classic29er06.JPG
GEBLA-Classic29er07.JPG
GEBLA-Classic29er08.JPG
GEBLA-Classic29er09.JPG
Greetings,
Georg
GEBLA PRECISION FRAMES - Engineered to perform - Designed to fit - Handmade to order
Georg Blaschke
http://www.gebla.de
http://www.georgblaschkebikes.wordpress.com
Bookmarks